Viewing Wireless Camera Video
Before you can view video from your wireless camera, you must install the camera, transmitter, and receiver cable. See the installation instructions for your wireless camera for more information.
Your GPS device shows video from your paired wireless cameras in different ways, depending on how the camera transmitter is connected to power.
1 Select an option to show video:
• If the transmitter is connected to a reverse lamp (recommended), place the vehicle into reverse.
The device automatically shows video from the backup camera.
• If the transmitter is connected to a running lamp or other steady 12 Vdc source, select on the device to show video from the backup camera.
2 Select an option to resume normal device operation:
• If the transmitter is connected to a reverse lamp (recommended), take the vehicle out of reverse.
The device automatically resumes normal operation.
• If the transmitter is connected to a running lamp or other steady 12 Vdc source, select on the device to resume normal operation.
Specifications
| Camera and transmitter input voltage | From 9 to 28 Vdc |
| Transmitter fuse | 500 mA, fast-blow |
| Camera and transmitter current usage | 150 mA at 12 Vdc |
| Camera and transmitter waterproof rating | IEC 60529 IPX7* |
| Camera and transmitter range | From -40° to 85°C (from -40° to 185°F) |
| Transmitter and receiver cable temperature range | From -20° to 70°C (from -4° to 158°F) |
| Receiver cable input voltage | From 10 to 24 V |
| Receiver cable fuse | 2 A,250 V |
GSP-1700 